AGMA2000 - Gear Classification And Inspection Handbook Tolerances And Measuring Methods For Unassembled Spur And Helical Gears (Including Metric Equivalents) (See Notice For Replacement Information)
This Standard establishes a classification system which may be used to communicate geometrical quality specifications of unassembled external and internal involute gearing.
AGMA2001 - Gear Teeth, Involute Spur And Helical, Fundamental Rating Factors And Calculation Methods For
This Standard provides a method by which different gear designs can be compared.
AGMA218.01 - Gear Teeth, Spur And Helical Involute, Agma Standard For Rating The Pitting Resistance And Bending Strength Of (S/S By Agma2001 And Agma908)
AGMA390.03 - Gear Handbook - Gear Classification, Materials And Measuring Methods For Bevel, Hypoid, Fine Pitch Wormgearing And Racks Only As Unassembled Gears (S/S By Agma2009 And Agma 2011)
AGMA6019 - Gearmotors Using Spur, Helical, Herringbone, Straight Bevel, Or Spiral Bevel Gears, Standard For
This Standard applies to gearmotors defined as enclosed gear drives having spur, helical, herringbone, straight bevel or spiral bevel gearing, in any combination with an electric motor of 1/8 hp or larger, the frame of one supporting the other, with the motor shaft common or directly coupled to the input shaft and parallel, concentric or at a right angle to the output shaft.
AWS-A6.1 - Gas Shielding Arc Welding, Safe Practice For
AWS-A6.3 - Plasma Arc Cutting, Safe Practices For
CGA-E1 - Regulator Outlets, Torches And Fitted Hose For Welding And Cutting Equipment, Standard Connections For
This standard described connections for regular outlets, torches and fitted hose for welding and cutting equipment.
EIA494 - 32 Bit Binary Cl (Bcl) And 7 Bit Ascii Cl (Acl) Exchange Input Format For Numerically Controlled Machines
The scope of this Standard is the definition of the response of a numerically controlled machine to a valid sequence of records made up of 32 bit binary words or ASCII text strings.
EIA-RS227 - Tape, Perforated, One Inch
This standard covers the physical characteristics of one-inch perforated tape for use with numerical machine controls.
EIA-RS244 - Character Code For Numerical Machine Control Perforated Tape
This standard for numerical machine control perforated tape is intended to serve as a guide in the coordination of equipment design, to minimize the number of sizes and codes of perforated tape used, and to minimize the variety of perforated tape preparation equipment required by users of numerically controlled machines.
EIA-RS267 - Machines, Numerically Controlled, Axis And Motion Nomenclature For
This standard for axis and motion nomenclature for numerically controlled machines is intended to simplify programming, to simplify the training of programmers, and to facilitate the interchangeability of control tapes.
EIA-RS274 - Machines, Numerically Controlled, Interchangeable Perforated Tape Variable Block Format For Contouring And Contouring/Positioning
This standard is intended to serve as a guide in the coordination of system design, to minimize the variety of program manuscripts required, to promote uniformity of programming techniques, and to foster interchangeability of input data between numerically controlled machines of the same classification by type, process function, size, and accuracy.
EIA-RS281 - Machine, Numerical, Control, Electrical & Construction Standards For - 1979
The provisions of this Standard apply when equipment of one or more of the following categories is funished as part of a numerically controlled machine sysem. a. Electronic control. b. Electro-mechanical low power logic and switching equipment. c. Electro-mechanical transducers. d. Other servo components.
EIA-RS358 - Subset Of Usa Standard Code For Information Interchange For Numerical Control Perforated Tape
This standard describes the use of ANSI X3.4 for numerically controlled machines and associated perforated tape preparation equipment.
GGG-D-645 - Drill Chucks And Check Keys (Use Ggg-C-350)
ISO1122-1 - Vocabulary Of Gear Terms - Part 1: Definitions Related To Geometrical Definitions
This part of ISO 1122 contains the part of the international glossary of gears which is devoted solely to geometrical definitions.
ISO54 - Cylindrical Gears For General Engineering And For Heavy Engineering-Modules
This International Standard lays down the values of modules and diametral pitches for straight and helical gears for general engineering and for heavy engineering, the automotive field being excluded.
JIC-EMP-1/EGP-1 - Electrical Standards For Mass Production Equipment/Electrical Standards For General Purpose Machine Tools - 1967
The provisions of this standard shall apply to all electrical systems, furnished as part of the mass production industrial equipment, which operate from a supply voltage of 600 volts or less, commencing at the power supply terminals on the disconnecting means.
MIL-C-4087 - Color Conditioning Of Machinery And Shop Equipment, General Specification For
MIL-HDBK-702 - Engineering Practices Productivity Enhancement Of Industrial Plant Equipment And Production Support Systems
This handbook provides engineering practice guidance for engineering personnel responsible for selection, justification, and post operation analysis of productivity enhancing industrial plant equipment (IPE) and related computer aided manufacturing support systems.
MIL-W-12683 - Welding, Joint Designs, Data For Structures Other Than Armor (Use Mil-Std-22)
MIL-W-27664 - Welding, Spot, Inert-Gas Shielded Arc
This specification covers requirements for the tungsten inert gas shielded are spot welding process.
NEMA-EW6 - Guidelines For Precautionary Label For Arc-Welding And Cutting Products
This publication sets forth guidelines for the wording and format of precautionary labeling for use on arc welding and cutting products.
NEMA-ICS9 - Table Of Contents, Detailed, For The Standards Publications Of The Industrial Control And Systems Section - 78
NEMA-MG7 - Motion/Position Control Motors, Controls, And Feedback Devices
This standards publication covers all rotational and linear electric servo and stepper motors and their power requirements, feedback devices, and controls intended for use in a motion/position control system that provides precise positioning, or speed control, or torque control, or in any combination.
NFPA70 - National Electrical Code
NFPA-T2.24.1 - Hydraulic Fluid Power-Systems Standard For Stationary Industrial Machinery
This standard is applicable to all hydraulic fluid power systems which constitute or are a part of a stationary industrial equipment.
RMA-IP7 - Rubber Welding Hose, Specifications For
This specification covers light duty, standard duty, and heavy duty hose to be used with oxy-fuel gas equipment for welding, cutting or other allied processes, such as brazing, metallizing, heating and scarfing downstream of a pressure control device.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business